Wednesday, December 26, 2007

Heljan Falcon DCC



This was a relatively easy one to fit, no screws to remove the body, just used four thin plastic strips to slip between the body and the chassis and it came off fairly easily.




One of the nice LENZ Direct (8 pin) decoders fits directly in and pop the top back on.




Unfortunately the couplings are going to be harder as there is much internet fuss about the fact that the skirt below the buffer beam has been glued on and will foul *any* couplers that are fitted...I think I'll wait and see what happens...




2 comments:

Cindy Dy said...

This is just the information I am finding everywhere. Thanks for your blog, I just subscribe your blog. This is a nice blog.


Yong
www.gofastek.com

sarah lee said...

I really enjoyed reading your article. I found this as an informative and interesting post, so i think it is very useful and knowledgeable. I would like to thank you for the effort you have made in writing this article.


edupdf.org